Berkomunikasi dengan pemasok? Pemasok
Zhubingde Mr. Zhubingde
Apa yang dapat saya lakukan untuk Anda?
Hubungi pemasok
Beranda > Produk > Ctcp Plate > Piring Ctcp Tanpa Proses > Aluminium Cetak Offset Plat Photopolymer Violet
Aluminium Cetak Offset Plat Photopolymer Violet
Aluminium Cetak Offset Plat Photopolymer Violet
Aluminium Cetak Offset Plat Photopolymer Violet
Aluminium Cetak Offset Plat Photopolymer Violet
Aluminium Cetak Offset Plat Photopolymer Violet
Aluminium Cetak Offset Plat Photopolymer Violet
  • Aluminium Cetak Offset Plat Photopolymer Violet
  • Aluminium Cetak Offset Plat Photopolymer Violet
  • Aluminium Cetak Offset Plat Photopolymer Violet
  • Aluminium Cetak Offset Plat Photopolymer Violet
  • Aluminium Cetak Offset Plat Photopolymer Violet
  • Aluminium Cetak Offset Plat Photopolymer Violet

Aluminium Cetak Offset Plat Photopolymer Violet

    Jenis pembayaran: L/C,T/T,D/P
    Incoterm: FOB,CFR,CIF,EXW
    Waktu pengiriman: 30 Hari

Additional Info

Kemasan: Kayu karton

Transportasi: Ocean,Land,Air

Tempat asal: Cina

Kemampuan Supply: Strong

Pelabuhan: ShangHai Port,Ningbo Port

Deskripsi Produk

2018 Teknologi baru aluminium cetak offset violet photopolymer plat ctp negatif

DATA TEKNIS


PPVS VIOLET PHOTOPOLYMER CTP PLATE

Plate Type

Negative working, violet photopolymer digital plate

Application

Newspaper/Commercial printing

Substrate

Electrochemically grained and anodized aluminum substrate

Gauge

0.15/0.20/0.25/0.30/0.40mm

Maximum width

1320mm

Spectrum scope

405nm

Platesetter compatibility

All the main brands in market,like Agfa/FFEI&FUJI/ Krause/ECRM/Highwater/Escher-Grad/Dotline

Sensitivity

70-80mj/cm2

Safe light

For manual handling and platesetting loading, darkroom conditions with G10 safelight is required

Dot reproduction

3% to 97% @ 175 lpi under calibration

Run length

More than 150,000 impressions.
Actual run length may vary according to press/paper/ink conditions

Processors

Recommended: Glunz&Jensen Raptor, Height inca/maya etc.

Developer

Huaguang PPD, FUJI LP-DWS, Agfa PL-10, IMAF NEGA 910

Processing

Preheat temp setting 90-100°C (plate surface temp.)
For HuaGuang PPD: Developer, temperature 22-24°C /Dwell time 16-17 seconds For FUJI LP-DWS: Developer temperature 25-26°C /Dwell time 16-17 seconds
For Agfa PL-10:Developer temperature 24°C /Dwell time 17 seconds

Packaging

0.15mm 100 pieces/box

0.25/0.30mm 50 pieces/box if length <1030mm;

                       30 pieces/box if length ≥1030mm;

                       25 pieces/box if the area > 1m2

Shelf life

12 months, under recommended storage conditions

Transportation and Storage

Store plates flat in their packaging (un-opened), away from excessive cold, heat or high humidity at 15°C -26°C, with RH between 40 - 70%.

2020 Negative Ctp Plate

PRODUK MENUNJUKKAN

2020 Negative Ctp Plate2020 Negative Ctp Plate 2018 Teknologi baru aluminium cetak offset plat photopolymer pembuat plat ctp negatif Photopolymer Printing Plate 2018 Teknologi baru aluminium cetak offset plat photopolymer pembuat plat ctp negatif 2018 Teknologi baru aluminium cetak offset plat photopolymer pembuat plat ctp negatif 2018 Teknologi baru aluminium cetak offset plat photopolymer pembuat plat ctp negatif Photopolymer Printing Plate
CARA KEMASAN

Photopolymer Printing Plate

PRODUK UTAMA

Photopolymer Printing Plate

INFORMASI PERUSAHAAN

Photopolymer Printing Plate

Faq

Photopolymer Printing Plate

MENGANGKUT

Photopolymer Printing Plate




Kategori Produk : Ctcp Plate > Piring Ctcp Tanpa Proses

Email ke pemasok ini
  • Mr. Zhubingde
  • Pesan Anda harus antara 20-8000 karakter

Daftar Produk Terkait

Rumah

Phone

Skype

Permintaan